Site map  |  Contact Us  |     Chinese
Product Search:
FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.FUJIAN PENGJIE MOTOR CO,. LTD.

FAQ


Hot Product

DCEC CUMMINS Series

DCEC CUMMINS Series

CCEC CUMMINS Series

CCEC CUMMINS Series

DEUTZ Series

DEUTZ Series

perking series

perking series

YUCHAI Series

YUCHAI Series

DCEC CUMMINS Series

DCEC CUMMINS Series

CCEC CUMMINS Series

CCEC CUMMINS Series

TFW Series

TFW Series

TFW Series

TFW Series

About Generator

Location: Home -> FAQ -> About Generator

Title: Diesel generator use and maintenance
Time: 2013/7/11 11:13:21
A-level maintenance (Day Care)
l) Check generator work daily;
2) Check the generator oil flat, coolant plane;
3) generators daily inspection for damage, leakage, whether the belt is loose or worn;
4) Check the air filter, clean the air filter core and replace if necessary;
5) release of the fuel tank and fuel filter in the water or sediment;
6) Check the water through filters;
7) Check the starter battery and battery fluid, if necessary, adding replenisher;
8) Start the generator and check for abnormal noise;
9) Clean the tank with an air gun, coolers and cooling network dust.
Class B Maintenance
1) Class A repeated daily inspection;
2) every 100-250 hours, to replace the diesel filter;
All diesel filter can not be cleaned. Only can be replaced. 100-250 hours is a flexible time must be based on actual Clean Diesel and replaced;
3) every 200-250 hours, to replace the generator oil and oil filter;
Oil must meet API CF or above U.S.;
4) Replace the air filter (unit running 300-400 hours);
Room environment should pay attention to while the time decided to replace the air filter, this filter can be cleaned with an air gun;
5) Replace the water through filter and add DCA concentration;
6) cleaning crankcase breather valve strainer.

C-level maintenance unit operation 2000-3000 hours, do the following:
Repeat A, B level maintenance
1) Remove the valve cover, cleaning oil, sludge;
2) fastening screws ministries (including running part, the fixed part);
3) with the engine crankcase Jie Ba cleaning, sludge, iron and sediment;
4) Check the wear on the turbocharger and clean coke, if necessary, adjust;
5) Check and adjust valve clearance;
6) Check the PT pump, fuel injector work, adjusting injector stroke, when necessary adjustments;
7) Check and adjust fan belt, water pump belt tension, if necessary, adjust or replace: cleaning water tank cooling network and check the thermostat performance.

Minor repairs (ie, D-level maintenance) (3000-4000 hours)
l) check valve, valve seat and other wear and tear, if necessary, repair or replacement;
2) Check the PT pump, fuel injector working conditions, if necessary, repair, adjustment;
3) Check and adjust linkage and the fastening screws of torque;
4) Check and adjust valve clearance;
5) Adjust injector stroke;
6) Check and adjust fan belt tension charger;
7) cleaning the intake manifold of coke;
8) Cleaning intercooler core;
9) clean the whole engine oil lubrication system;
10) cleaning rocker chamber, oil pan sludge and metal filings.

In the repair (6000-8000 hours)
(1) containing a small repair projects;
(2) Resolution engine (except crankshaft outside);
(3) Check the cylinder, piston, piston rings, intake and exhaust valves, etc. crank, valve, lubrication system, cooling system, wearing parts and replace if necessary;
(4) Check the fuel supply system, adjustable oil pump nozzle;
(5) generator power ball repair detection, clean oil deposits, lubricated electric ball bearings.


Overhaul (9000-15000 hours)
(1) Included in the repair project;
(2) All engine disintegration;
(3) replacement of the cylinder block, pistons, piston rings, size bearings, crankshaft thrust pad, intake and exhaust valves, complete engine overhaul kits;
(4) adjust the oil pump, fuel injector, replace pump core, fuel injection head;
(5) Replace turbocharger overhaul kits, water pump repair kits;
(6) Calibration rod, crankshaft, and other parts of the body, if necessary, repaired or replaced.
Before a Article: Diesel generator set concept and test methods
Is The Final Article